Steps To Troubleshoot Read-Only File System / Dev / Sdb1

Steps To Troubleshoot Read-Only File System / Dev / Sdb1

 

If the read-only file system error code / dev / sdb1 cannot be opened on your computer, you need to check these methods to fix it.

PC running slow?

  • 1. Download and install Restoro
  • 2. Launch the program and select your language
  • 3. Scan your computer for errors and fix them automatically
  • Optimize your PC now with this free and easy download.

     

     

    cannot open /dev/sdb1 read-only file system

    I cannot format the title because it is read-only. I tried some research and additionally solutions. I even tried it when I was sent to school, and I realized that I was lucky. Unfortunately below is what I get.

      GParted 0.11.0 --enable-libparted-dmraidLibparted 2.3Remove / dev / sdb1 (fat32, 14.91 GiB) from / dev / sdb 00:00:00 ERROR ()        calibrate / dev / sdb1 00:00:00 (SUCCESS)        Path: / dev / sdb1Start: 32End: 31.266.815Size: 31,266,784 (14.91 GB)Delete section 00:00:00 (ERROR)libparted emails (INFO)        Unable to open / dev / sdb (read-write excitation system). / dev / sdb is configured as read-only.The file / dev / sdb cannot be opened for read / write (system is write protected). / Dev / sdb is now read-only.The file / dev / sdb cannot be opened for read / write (system is write protected). / Dev / sdb was read-only.The file / dev / sdb cannot be opened for read / write (system is write protected). Whether / dev / sdb was running write-protected.The file / dev / sdb cannot be opened for read / write (system is write protected). / dev / sdb showed up as read-only.Unable to write to / dev / sdb because the idea is read-only.Unable to read and write unbiased file / dev / sdb (write-protected system). / Dev / sdb was read-only. 
      [10061.878073] usb 2-1.3: no more high speed USB device, consfucking 8 numbers ehci_hcd[1061.972140] scsi9: USB stick 2-1.3: 1.0[10062.969922] 9: 0: 0: 0: SanDisk Cruzer Blade Direct Access scsi 1.20 PQ: 0 ANSI: 5[10062.971746] SD 9: 0: 0: 0: Scsi SG2 standard application type 0[10062.972799] sd 9: 0: 0: 0: 31266816 [sdb] 512-byte logical blocks: (16.0 GB / 14.9 GB)[10062.Sd 976439] 9: 0: 0: 0: [sdb] Write protection activated[10062.976453] sd [sdb] 9: 0: 0: 0: mode definition: 43 00 80 00[10062.977353] sd 9: 0: 0: 0: [sdb] Write to cache: disabled, via cache: enabled, does not support DPO FUA[10062 or 999026] sdb: sdb1[10063.003367] sd 9: 0: 0: 0: [sdb] Removable storage device with SCSI connection 

    cannot open /dev/sdb1 read-only file system

      sudo fsck -n / dev / sdbfsck from util-linux 2.20.1e2fsck 1.42 (11/29/2011)fsck.ext2: device or resource is busy trying to open / dev / sdbIs the file system hosted or exclusively opened by another program? 
      hard drive / dev / sdb1: 16.0 GB, 16008593408 heads, bytes64 33 sectors per track, 15,266 cylinders, total 31,266,784 sectorsUnits correspond to sectors of size 1 1.512 = 512 bytes.Sector size (logical / physical): 512 bytes / 512 bytesI / O Width (Min / Optimum): 512 Bytes / 512 BytesDisk ID: 0x6f20736bDoesn't sound like the best partition tableMost likely, you have selected the wrong device.     Launching the devicedevices when starting the end-block identification system/ dev / sdb1p1! ! ! 778135908 1919645538 570754815+ 72 Unknown/ dev / sdb1p2? 168689522 2104717761 968014120 forty-eight Novell Netware 386/ dev / sdb1p3? 1869881465 3805909656 968014096 seventy nine Unknown/ dev / sdb1p4? ? ? ? 2885681152 2885736650 27749+ Chemical UnknownPartition table entries are not ordered by disk 

    This is not necessarily fully resolved because I’ve tried many possibilities. Do you have any idea why this needs to be fixed?

    As with the title, I can format it read-only. I tried working a little with it and with the solutions. I even tried to watch GParted, now I’m lucky. Unfortunately, this is what I get.

      GParted 0.11.0 --enable-libparted-dmraidLibparted 2.3Delete / dev / sdb1 (fat32, 14.91 from gib) / dev / sdb 00:00:00 (ERROR)calibrate / dev / sdb1 00:00:00 (SUCCESS)Path: / dev / sdb1Start: 32End: 31.266.815Size: 31,266,784 (14.91 GB)Delete section 00:00:00 (ERROR)libparted messages (INFO)The file / dev / sdb cannot be opened for read / write (system is write protected). Open / dev / sdb in horrible read-only mode.The file / dev / sdb cannot be opened for read / write (system is write protected). OpenEat / dev / sdb in horrible read-only mode.The file / dev / sdb cannot be opened for read / write (system is write protected). Done / dev / sdb is read-only.The file / dev / sdb cannot be opened for read / write (system is write protected). Running / dev / sdb is read-only.The file / dev / sdb cannot be opened for read / write (system is write protected). / Dev / sdb was read-only.Unable to write to / dev / sdb because it is read-only.Unable to open file / dev / sdb for reading and writing (write-protected system). / Dev / sdb was read-only. 
      [10061.878073] Thumb 2-1.3: new 8-volume high-speed USB device with ehci_hcd[1061.972140] scsi9: USB stick 2-1.3: 1.0[10062.969922] 9: 0: 0: 0: SanDisk Cruzer Blade Direct Access scsi 1.20 PQ: Three ANSI: 5[10062.971746] sd 9: 0: 0: 0: scsi sg2 type 0 simple added[10062.972799] SD 9: 0: 0: 0: 31266816 [sdb] 512-byte logical blocks: (16.0 GB / 14.9 GB)[10062.Sd 976439] 9: 0: 0: 0: [sdb] Write protection activated[10062.976453] sd [sdb] 9: 0: 0: 0: mode definition: 43 00 78 00[10062.977353] sd 9: 0: 0: 0: [sdb] Write to cache: otherwise possible, read from cache: enabled, does not support DPO FUA[10062 or 999026] sdb: sdb1[10063.003367] sd 9: 0: 0: 0: [sdb]SCSI hard drive plugged in, easy to remove 
      sudo -n fsck / dev / sdbfsck from util-linux 2.20.1e2fsck 1.42 (11/29/2011)fsck.ext2: Productive device or resource when trying to open mounted / dev / sdbFile system or is it only opened by another program? 

    PC running slow?

    Is your computer running slow? Do you keep getting the Blue Screen of Death? If so, it's time to download Restoro! This revolutionary software will fix common errors, protect your data, and optimize your computer for maximum performance. With Restoro, you can easily and quickly detect any Windows errors - including the all-too-common BSOD. The application will also detect files and applications that are crashing frequently, and allow you to fix their problems with a single click. So don't suffer from a slow PC or regular crashes - get Restoro today!

  • 1. Download and install Restoro
  • 2. Launch the program and select your language
  • 3. Scan your computer for errors and fix them automatically

  •   hard drive / dev / sdb1: 16.0 GB, 16008593408 heads, bytes64 33 sectors per track, 15,266 cylinders, total 31,266,784 sectorsUnits = sectors of 1 (empty) 512 = 512 bytesSector sizes (logical / physical): 512 bytes / 512 bytesI / O Ratio (Min / Optimum): 512 Bytes / 512 BytesDisk ID: 0x6f20736bIt doesn't look like a trusted partition tableYou may have chosen the wrong device.     Boot block identification system when the device is loaded/ dev / sdb1p1. ... ... 778135908 1919645538 570754815+ 72 Unknown/ dev / sdb1p2? 168689522 2104717761 968014120 65 Novell Netware 386/ dev / sdb1p3? 1869881465 3805909656 968014096 seventy nine Unknown/ dev / sdb1p4! 2885681152 2885736650 27749+ d UnknownPartition table word options are not listed in disk order 

    This is clearly not fixed as I have tried many ways. Do you have any ideas on how to solve this problem?

     

     

    Optimize your PC now with this free and easy download.

    Can’t open Dev SDB read-only file system?

    Try asking sudo hdparm -r0 / dev / sdb first (method removed from another askubuntu answer). Then try to mount the partition again. If these steps don’t work, you have almost no luck with your USB stick.

    How do I fix a read-only file system?

    Another way to resolve read-only PC file errors is to restart the system. Reboot that system to restart it, clearing up previous errors that libraries, configurations, temp buttons, etc. may have.

    How do I format a read-only file in Linux?

    sudo apt-get replaces gparted.sudo gparted.Select your USB stick in the upper right corner of gparted.Make sure the drive is going to be unmounted (this could be the key), right-click the drive and select Unmount.To be able to do this formatting, right-click on the drive to select the file system 🙂

     

     

     

    Nao E Possivel Abrir Dev Sdb1 Sistema De Arquivos Somente Leitura
    Kan Inte Oppna Dev Sdb1 Skrivskyddat Filsystem
    Impossible D Ouvrir Le Systeme De Fichiers En Lecture Seule Dev Sdb1
    Dev Sdb1 읽기 전용 파일 시스템을 열 수 없습니다
    Impossibile Aprire Il File System Di Sola Lettura Dev Sdb1
    No Se Puede Abrir El Sistema De Archivos De Solo Lectura Dev Sdb1
    Ne Udaetsya Otkryt Fajlovuyu Sistemu Dev Sdb1 Tolko Dlya Chteniya
    Das Schreibgeschutzte Dateisystem Dev Sdb1 Kann Nicht Geoffnet Werden
    Kan Dev Sdb1 Alleen Lezen Bestandssysteem Niet Openen
    Nie Mozna Otworzyc Systemu Plikow Dev Sdb1 Tylko Do Odczytu